CTM Magnetics, Inc.

CTM Magnetics, Inc.Request A Quote

Tempe, AZ | 480-967-9447

https://www.ctmmagnetics.com/

CTM Magnetics is the premier supplier of power quality solutions for the line (grid) side and load (motor) side of variable frequency drives (VFDs) and other power conversion systems from (40 A - 3,000 A), and (0 Hz – 1 MHz). With innovative liquid cooled technology, CTM provides power quality products that offer 50% reductions in size, weight, audible noise, and 97% reduced cabinet air temperature rise at no additional cost.

CTM Magnetics provides line and high frequency sine wave filters (60Hz - 500Hz) to protect your motor, line/load reactors to reduce voltage spikes and harmonic distortion, active front-end filters for ultimate line side filtering, passive harmonic filters for IEEE-519 compliance in up to 25% voltage distortion environments, grid-tie filters for power generation, high frequency transformers, reactors for motor test stands and EV applications, and other superior power quality products that improve overall system performance, efficiency, and reliability. We serve HVAC & Chillers, Marine, Oil & Gas, Military, and EV markets. CTM is committed to innovation, so that we can deliver the highest quality solutions for the power quality needs of today and tomorrow.

Leading Electric Transformer Manufacturers

Triad Magnetics

CES Transformers

Spang Engineered Solutions

Lenco Electronics, Inc.

Olsun Electrics Corporation

More Electric Transformer Manufacturers

Electric Transformers Power Pages

Electric Transformers

Electric transformers are static electrical machines that transform electric power from one circuit to the other without changing the frequency. An electrical transformer can increase or decrease the voltage with…

Isolation Transformers

An isolation transformer, just like typical transformers, is a non-moving device that transmits electrical energy from one circuit to another without requiring any physical contact. It works on the idea of magnetic…

Plug-In Transformers

Plug-in transformers are class 2 power supplies that are intended for connections with 15 ampere, 120 or 240 volt alternating current (AC) branch circuits. The classification of class 2 power supplies comes from…

Power Transformer

Power transformers are electrical instruments used in transmitting electrical power from one circuit to another without changing the frequency. They operate by the principle of electromagnetic induction. They are used in transmitting electrical power between…

Three-Phase Transformers

An electrical transformer is a passive machine that transfers electrical energy from one circuit to another using a magnetic flux to induce an electromotive force. Transformers are used to increase (step-up) or decrease (step-down) voltages without changing the frequency of the electric current…

Toroidal Transformers

A toroidal transformer is a type of electrical transformer constructed with a torus or donut-shaped core. Its primary and secondary windings are wound across the entire surface of the torus core separated by an insulating material…

Types of Electric Transformers

Electronically operated equipment depends on power transformers to convert electrical currents into voltage. Current transformers store and transport energy through power lines and grids…

Electric Coils

An electric coil, or electromagnetic coil, is an electrical conductor that contains a series of conductive wires wrapped around a ferromagnetic core that is cylindrical, toroidal, or disk-like. Electric coils are one of the simplest forms of electronic components and provide…

High Voltage Power Supply

By definition a power supply is a device that is designed to supply electric power to an electrical load. An electrical load refers to an electrical device that uses up electric power. Such a device can be anything from…

CTM Magnetics, Inc.